但是更多的还是使用 Nginx 的 7 层功能。### 2,容器化下 LB 的异同点在物理机时代,还没有容器化之前,典型的负载均衡的建设方案就是搭建一套 Nginx 集群,提供 7 层的代理;搭建一套 LVS 集群,提供 4 层代理方案。... (https://p3-juejin.byteimg.com/tos-cn-i-k3u1fbpfcp/317dbdaa52eb49b1b9310ed4020aa56f~tplv-k3u1fbpfcp-5.jpeg?)详细说明如下:* 体验需求 * 大部分用户:业务要暴露自己的服务只需要足够简单的配置和理解...
# 前言本文档介绍如何使用Helm在VKE群集中安装nginx-ingrss控制器并通过ingress代理tomcat服务。# 关于实验- 预计部署时间:30分钟- 级别:初级- 相关产品:VKE- 受众: 通用# 实验说明如果还没有火山引擎账号,点击此[链接](https://console.volcengine.com/auth/signup/?redirectURI=%2Fecs%2Finstance)注册账号如果还没有VKE集群,参考此[链接](https://www.volcengine.com/docs/6460/78094)快速创建一个VKE# 第一步、环境...
example.subpath.1: subpath1 example.subpath.2: subpath2 example.subpath.file: |- property.1=value-1 property.2=value-2 property.3=value-3```2.创建configmap```shell$ kubect... image: nginx volumeMounts: - name: config-volume mountPath: /etc/nginx/conf.d/example.subpath.file subPath: example.subpath.file volumes: - name: config...
example.subpath.1: subpath1 example.subpath.2: subpath2 example.subpath.file: |- property.1=value-1 property.2=value-2 property.3=value-3```2. 创建 configmap```shell$ k... image: nginx volumeMounts: - name: config-volume mountPath: /etc/nginx/conf.d/example.subpath.file subPath: example.subpath.file volumes: - name: config...
环境说明本教程以以下环境为例介绍相关的操作步骤: 服务器:操作系统:Ubuntu 22.04 64位 Web服务程序:Nginx 1.18.0版本 Web服务程序的安装目录:/etc/nginx 说明 服务器环境不同,可能导致实际配置与本文描述有差异。这种情况下,您需以实际环境为准,本文只作为参考。 示例域名:ssl.example.com 域名对应的虚拟主机配置(Virtural Host Configs)文件的路径:/etc/nginx/conf.d/ssl.example.com.conf 教程概览本教程将指导您修改ng...
bash kubectl create secret tls ingress-secret --key tls.key --cert tls.crt步骤二:配置路由规则创建 Ingress 的 YAML 文件。示例文件nginx-ingress.yaml代码如下: yaml apiVersion: networking.k8s.io/v1kind: Ingressmetadata: name: nginx-ingress 路由规则的名称spec: ingressClassName: nginx 指定 Ingress Controller rules: - host: example.com 转发规则域名 http: paths: - backend: ...
为 Nginx Ingress 对外暴露的 IP 地址。 bash curl -H "Host: example.com" http:// 预期结果如下,访问到了后端旧版本的应用。 bash This is the old version of nginx配置灰度发布Nginx Ingress 支持基于 Header、Cookie 和服务权重三种流量切分策略,实现灰度发布。 注意 相同服务的 Canary Nginx Ingress 仅能够定义一个,因此后端服务最多支持两个版本。 即使流量完全切到了 Canary Nginx Ingress 上,旧版本服务仍需存在,否则会...
各服务之间互不影响,允许您基于实际业务需求或场景,对外提供不同的服务访问。例如: 在多业务共享集群的场景下,您可以为不同业务配置各自独立的 Nginx Ingress Controller 服务,保证不同的业务匹配不同的服务规则。... nginx 自定义的 Nginx Ingress Controller 名称 rules: - host: example.com 外部访问的域名 http: paths: - pathType: Prefix path: / backend: service: na...
一般情况下,Nginx Ingress 与后端服务的对接使用的是 HTTP 协议,为保证后端通信安全,您可以通过 Annotation 配置使用 HTTPS 协议对接后端服务器。本文为您介绍如何通过 HTTPS 对接后端服务器。 前提条件已连接集群... nginx.ingress.kubernetes.io/backend-protocol: "HTTPS" 使用 HTTPS 协议对接后端服务器spec: ingressClassName: nginx 指定 Ingress Controller rules: - host: example.com 转发规则域名 http: p...
# 前言本文档介绍如何使用Helm在VKE群集中安装nginx-ingrss控制器并通过ingress代理tomcat服务。# 关于实验- 预计部署时间:30分钟- 级别:初级- 相关产品:VKE- 受众: 通用# 实验说明如果还没有火山引擎账号,点击此[链接](https://console.volcengine.com/auth/signup/?redirectURI=%2Fecs%2Finstance)注册账号如果还没有VKE集群,参考此[链接](https://www.volcengine.com/docs/6460/78094)快速创建一个VKE# 第一步、环境...
example.subpath.1: subpath1 example.subpath.2: subpath2 example.subpath.file: |- property.1=value-1 property.2=value-2 property.3=value-3```2. 创建 configmap```shell$ k... image: nginx volumeMounts: - name: config-volume mountPath: /etc/nginx/conf.d/example.subpath.file subPath: example.subpath.file volumes: - name: config...
example.subpath.1: subpath1 example.subpath.2: subpath2 example.subpath.file: |- property.1=value-1 property.2=value-2 property.3=value-3```2.创建configmap```shell$ kubect... image: nginx volumeMounts: - name: config-volume mountPath: /etc/nginx/conf.d/example.subpath.file subPath: example.subpath.file volumes: - name: config...
# 问题描述在 VKE 控制台只对要访问的域名设置了https,但是通过http也可以访问。# 问题分析ingress-nginx 默认会把80端口的请求强制跳转到443端口,如不想开启跳转功能,可以通过 annotation 或 ConfigMap 关闭该功能。# 问题解决1. 通过 annotation 关闭80跳转到443```$ cat test-ingress.yamlapiVersion: networking.k8s.io/v1kind: Ingressmetadata: name: example-ingress namespace: default annotations:...