哪个开发板/套件支持摄像头的并行接口？

可以使用基于FPGA的开发板/套件来实现摄像头的并行接口。例如，ZedBoard是一款基于Xilinx Zynq-7000 SoC的开发板，它提供了高速传输接口来支持摄像头的并行接口。以下是使用ZedBoard实现摄像头并行接口及图像处理的示例代码：

#include <stdio.h>
#include "xparameters.h"
#include "xgpio.h"
#include "ov7670.h"
#include "image_filter.h"

#define FRAME_SIZE 307200

int main()
{
    XGpio gpio;
    OV7670 ov7670;
    image_data_t frame_data[FRAME_SIZE];
    image_data_t processed_data[FRAME_SIZE];

    XGpio_Initialize(&gpio, XPAR_AXI_GPIO_0_DEVICE_ID);

    if (OV7670_initialize(&ov7670, XPAR_AXI_IIC_0_BASEADDR) == 0) {
        printf("Camera initialize failed!\r\n");
        return 0;
    }

    OV7670_reset(&ov7670);

    if (OV7670_configure(&ov7670, VGA_RBG_565, ROTATE_NONE, FLIP_NONE, 1, OV7670_RGB) == 0) {
        printf("Camera configure failed!\r\n");
        return 0;
    }

    OV7670_set_autogain(&ov7670, DISABLE);
    OV7670_set_autoexpo(&ov7670, DISABLE);

    while (1) {
        if (OV7670_capture(&ov7670, frame_data, FRAME_SIZE) == 0) {
            printf("Camera capture failed!\r\n");
            continue;
        }

        image_filter(frame_data, processed_data, VGA_WIDTH, VGA_HEIGHT);

        XGpio_DiscreteWrite(&gpio, 1, 0x00);
        XGpio_DiscreteWrite(&gpio, 1, 0xFF);

        XGpio_DiscreteWrite(&gpio, 1, 0x00);
        XGpio_DiscreteWrite(&gpio, 1, 0xFF);

        for (int i = 0; i < FRAME_SIZE; i++) {
            XGpio_DiscreteWrite(&gpio, 1, processed_data[i]);
        }
    }

    return 0;
}

该示例代码使用了名为OV7670的摄像头驱动和名为image_filter的图像处理函数。其中，OV7670_initialize函数用于初始化摄像头，OV7670_configure函数