WiFi32模块示例未编译

如果您遇到了这个错误，可能需要检查您的库和示例是否正确安装和编译。您可以使用以下步骤来解决这个问题：

1. 确认您已正确安装WiFi32 Arduino库。您可以前往"Sketch"-> "Include Library"-> "Manage Libraries"来查看库是否已安装。

2. 确认您已正确选择WiFi32板卡。您可以前往"Tools"-> "Board"-> "ETRONXHCI ESP32 Dev Module"来选择板卡。

3. 确认示例代码已正确编译。如果您在编译示例时遇到任何错误，请将错误日志粘贴到论坛中以获取协助。

以下是一个简单的WiFi32模块示例代码：

#include <WiFi32.h>
#include "secret.h"

char ssid[] = SECRET_SSID;   // your network SSID (name)
char pass[] = SECRET_PASS;  // your network password
int status = WL_IDLE_STATUS;

WiFi32Client client;

void setup() {
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  // check for the presence of the shield:
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi32 shield not present");
    // don't continue:
    while (true);
  }

  // attempt to connect to WiFi network:
  while (status != WL_CONNECTED) {
    Serial.print("Attempting to connect to SSID: ");
    Serial.println(ssid);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid, pass);
    // wait 10 seconds for connection:
    delay(10000);
  }

  Serial.println("Connected to wifi");
  Serial.println("\nStarting connection to server...");
  // if you get a connection, report back via serial:
  if (client.connect(server, 80)) {
    Serial.println("connected to server");
    // Make a HTTP request: