Ubuntu 22.04下Cideko Air Keyboard被识别为摇杆的修复求助

大家好，我的Cideko无线键盘之前用了好几年都没出过问题，最近突然闹脾气了——系统居然把它识别成摇杆了！现在唯一能让它勉强工作的办法就是打开摇杆校准界面，然后让它在后台一直挂着，这实在太折腾人了。

先给大家看看我的系统信息：

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.2 LTS"

lsusb的输出结果：

Bus 002 Device 004: ID 20e8:5861 Cideko Inc. AK08 Device
Bus 002 Device 003: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 004: ID 05e3:070e Genesys Logic, Inc. USB 2.0 Card Reader
Bus 001 Device 003: ID 15c2:0036 SoundGraph Inc. LC16M VFD Display/IR Receiver
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

查看/dev/input/by-id/的内容：

total 0
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-event-kbd -> ../event2
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-event-if03 -> ../event5
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-if01-mouse -> ../mouse0
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-if02-event-joystick -> ../event4
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-if01-event-mouse -> ../event3
lrwxrwxrwx 1 root root  6 Sep  7 09:43 usb-Cideko_Inc._AK08_Device-if02-joystick -> ../js0
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-15c2_0036-mouse -> ../mouse2
lrwxrwxrwx 1 root root  9 Sep  7 09:43 usb-15c2_0036-event-mouse -> ../event8
lrwxrwxrwx 1 root root 10 Sep  7 09:43 usb-046d_0825_7CD77CA0-event-if00 -> ../event10

我试过Denilson Sá Maia提到的禁用摇杆输入的修复方案，找到对应的udev规则文件后，添加了自己键盘的厂商/产品ID：

SUBSYSTEM=="input", ATTRS{idVendor}=="20e8", ATTRS{idProduct}=="5861", ENV{ID_INPUT_JOYSTICK}=="?*", ENV{ID_INPUT_JOYSTICK}=""

SUBSYSTEM=="input", ATTRS{idVendor}=="20e8", ATTRS{idProduct}=="5861", KERNEL=="js[0-9]*", MODE="0000", ENV{ID_INPUT_JOYSTICK}=""

结果第一个规则完全没起作用，第二个规则倒是把摇杆设备禁用了，但连我之前的临时 workaround 都用不了了，键盘彻底没法工作。

有没有大佬知道怎么才能让它重新被正确识别成键盘啊？

备注：内容来源于stack exchange，提问作者Fiddlestiques