西数蓝盘WDC WD60EZAZ在Ubuntu 22.04下运行不稳定的技术求助

大家好，我在Ubuntu 22.04系统里使用西数蓝盘WDC WD60EZAZ-00SF3B0时遇到了运行异常的问题，系统内核日志里弹出了一系列报错，具体日志内容如下：

[41465.303694] ata3.00: irq_stat 0x00400000, PHY RDY changed

[41465.303697] ata3: SError: { RecovComm HostInt PHYRdyChg PHYInt CommWake DevExch }

[41465.303702] ata3.00: failed command: READ FPDMA QUEUED

[41465.303705] ata3.00: cmd 60/18:70:90:ed:04/00:00:62:00:00/40 tag 14 ncq dma 12288 in

res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)

[41465.303713] ata3.00: status: { DRDY }

[41465.303716] ata3.00: failed command: WRITE FPDMA QUEUED

[41465.303718] ata3.00: cmd 61/00:a0:00:a6:72/0a:00:02:00:00/40 tag 20 ncq dma 1310720 ou

res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)

[41465.303726] ata3.00: status: { DRDY }

[41465.303729] ata3.00: failed command: WRITE FPDMA QUEUED

[41465.303730] ata3.00: cmd 61/00:a8:00:b0:72/0a:00:02:00:00/40 tag 21 ncq dma 1310720 ou

res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)

[41465.303737] ata3.00: status: { DRDY }

[41465.303740] ata3.00: failed command: WRITE FPDMA QUEUED

[41465.303742] ata3.00: cmd 61/00:b0:00:ba:72/0a:00:02:00:00/40 tag 22 ncq dma 1310720 ou

res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)

[41465.303749] ata3.00: status: { DRDY }

[41465.303751] ata3.00: failed command: WRITE FPDMA QUEUED

[41465.303753] ata3.00: cmd 61/00:b8:00:c4:72/04:00:02:00:00/40 tag 23 ncq dma 524288 out

res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)

[41465.303760] ata3.00: status: { DRDY }

[41465.303764] ata3: hard resetting link

[41472.063593] ata3: found unknown device (class 0)

[41474.299571] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[41474.312959] ata3.00: configured for UDMA/133

[41474.312983] sd 2:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=9s

[41474.312987] sd 2:0:0:0: [sdb] tag#14 Sense Key : Illegal Request [current]

[41474.312991] sd 2:0:0:0: [sdb] tag#14 Add. Sense: Unaligned write command

[41474.312994] sd 2:0:0:0: [sdb] tag#14 CDB: Read(16) 88 00 00 00 00 00 62 04 ed 90 00 00 00 18 00 00

[41474.312996] I/O error, dev sdb, sector 1644490128 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2

[41474.313015] ata3: EH complete

我想请教各位，是不是需要通过内核参数强制让系统以延迟模式适配这块硬盘？比如我考虑添加这个参数：libata.force=3.00:noncq,1.5g,nolpm,dbdelay

更新：后来排查发现，硬盘运行不稳定的根源可能是SATA硬盘的电源线连接不良，所以给Linux内核添加上述启动参数并没有解决这个问题。

备注：内容来源于stack exchange，提问作者Karol78