执行config-device-connection任务失败，连接错误IP如何解决？

Let’s work through this issue step by step—here’s how to get your task pointing to the correct MXCHIP device IP (192.168.1.94) instead of the Linux VM at 192.168.1.77:

1. Edit the VS Code Task Configuration File #

VS Code tasks are defined in .vscode/tasks.json (workspace-specific) or your user-level tasks file. Here’s how to adjust it:

• Open the command palette with Ctrl+Shift+P (Windows/Linux) or Cmd+Shift+P (macOS), then search for Tasks: Open Workspace Tasks (or "User Tasks" if the task is global).
• Locate the config-device-connection task. Look for hardcoded references to 192.168.1.77 in the command or args section.
• Replace the incorrect IP with 192.168.1.94. For example:

  {
    "label": "config-device-connection",
    "type": "shell",
    "command": "your-device-cli connect --ip 192.168.1.77 --port 443",
    // Update to:
    "command": "your-device-cli connect --ip 192.168.1.94 --port 443"
  }
  

2. Check Project/Environment Configuration Files #

Often, device IPs are stored in external config files instead of the task itself:

• Use VS Code’s global search (Ctrl+Shift+F) to search your project folder for 192.168.1.77. Look for files like .env, config.yaml, settings.json, or any custom project config files.
• If you find the IP in one of these files, update it to 192.168.1.94 and restart VS Code to apply the change.

3. Verify MXCHIP Extension Settings #

If you’re using an official MXCHIP extension for VS Code, it may have dedicated connection settings:

• Go to the Extensions tab, find the MXCHIP extension, click the gear icon, and select Extension Settings.
• Look for fields like "Device IP Address" or "Connection Endpoint" and set them to 192.168.1.94.

4. Clear VS Code Cache (If Needed) #

Sometimes VS Code caches old network or configuration data:

• Close VS Code completely.
• Navigate to the cache directory:
  • Windows: %APPDATA%\Code\Cache and %APPDATA%\Code\CachedData
  • macOS: ~/Library/Caches/Code and ~/Library/Caches/Code/CachedData
  • Linux: ~/.config/Code/Cache and ~/.config/Code/CachedData
• Delete the contents of these folders, then reopen VS Code.

5. Rule Out Network Conflicts #

Since the Linux VM at 192.168.1.77 can’t be shut down, ensure there’s no unintended port forwarding or network routing redirecting traffic to it:

• Run ss -tulpn (Linux/macOS) or netstat -ano (Windows) to check if port 443 is bound to the VM, but explicitly setting the correct IP in your task should bypass this conflict.

内容的提问来源于stack exchange，提问作者Albert Hoekstra