Hey there, sorry to hear you're stuck with this TWRP issue—especially since your volume keys aren't working, that's such a frustrating roadblock. Let's go through some reliable methods that don't rely on physical volume buttons to get your TWRP up and running:

1. Boot to TWRP Immediately After Flashing via Odin #

If you're still in the process of flashing TWRP (or can re-flash it), this is the most straightforward fix:

• Open Odin, load your TWRP image into the AP slot (and vbmeta.img into BL if your device requires disabling boot verification—double-check your device's TWRP guide for this)
• Uncheck the Auto Reboot option in Odin's settings (this is key—we don't want the device to boot back to stock recovery on its own)
• Start the flash process. Once Odin shows "PASS", leave the device connected to your computer
• Open a command prompt/terminal on your computer, run this command:

  adb reboot recovery
  

Your device will directly boot into the TWRP you just flashed, no physical buttons needed.

2. Use ADB to Reboot to TWRP from Stock System #

If your device is already booted into the stock Android system and you have USB Debugging enabled:

• Connect your device to your computer with a working USB cable
• Open a command prompt/terminal, run the same command as above:

  adb reboot recovery
  

This will skip the need for any hardware button presses and boot straight into TWRP.

3. Enable USB Debugging First (If It's Turned Off) #

If you haven't enabled USB Debugging yet, you can do this from the stock system without volume keys:

• Go to Settings > About Phone, then tap the Build Number 7 times to unlock Developer Options
• Head back to Settings, find and open Developer Options, then toggle on USB Debugging
• Once enabled, follow Step 2 above to reboot into TWRP via ADB.

Quick Notes #

• Make sure you're using the correct TWRP build for your exact device model—using the wrong image will cause it to fail to load, even after flashing.
• Ensure your computer has the latest Android SDK Platform Tools (ADB) installed, and that your device's USB drivers are properly set up (this prevents ADB from failing to detect your device).

内容的提问来源于stack exchange，提问作者takluiper