Gparted误将Windows NTFS分区识别为FAT32，Linux双系统安装受阻求助

Hey there, let's work through this dual-boot partition problem together—this is a common snag when setting up Linux alongside Windows, so here are actionable steps to diagnose and fix it:

• Check BIOS/UEFI RAID Mode
  Most modern PCs default to RAID storage mode, which can hide individual partitions from Linux live environments, making the disk look like a single unpartitioned block. Reboot into your BIOS/UEFI settings and switch the storage mode from RAID to AHCI. Note: After making this change, Windows might fail to boot initially—you can fix this by booting into Windows Safe Mode once, which will automatically load the AHCI drivers.

• Verify Your Live USB Integrity
  Corrupted ISO files or faulty USB creation can cause partition detection issues. Re-download the Linux ISO from the official source, verify its hash against the provided checksum, then re-create the live USB using a reliable tool like Rufus or Etcher.

• Match Boot Mode to Partition Table Format
  Ensure your BIOS/UEFI boot mode (UEFI vs Legacy) matches your disk's partition table (GPT vs MBR). For example:

  • GPT disks require UEFI boot mode
  • MBR disks require Legacy boot mode
    Mismatched modes can prevent proper partition recognition.

• Use Command-Line Tools to Confirm Partitions
  Sometimes GParted can have display glitches, so open a terminal in the live environment and run these commands to check disk and partition status:

  • lsblk: Lists all block devices and their partitions in a clean format
  • fdisk -l: Shows detailed partition table information (requires sudo)
    If these tools detect your resized Windows partitions, the issue is likely with GParted—try updating it via sudo apt update && sudo apt install gparted or use the built-in "Disks" utility instead.

• Disable Windows Fast Startup and Hibernation
  Windows Fast Startup keeps the disk in a partially mounted state, which can block Linux from accessing individual partitions. To fix this:

  1. In Windows, go to Control Panel > Power Options > Choose what the power buttons do
  2. Click Change settings that are currently unavailable
  3. Uncheck Turn on fast startup (recommended)
  4. Open Command Prompt as Administrator and run powercfg -h off to disable hibernation
  5. Fully shut down Windows (don't restart) before booting into the live USB

Hopefully one of these steps resolves the partition recognition issue for you!

内容的提问来源于stack exchange，提问作者Vladimir Bagazov