You need to enable JavaScript to run this app.
优惠活动
大模型
产品
解决方案
定价
更多

使用mhddfs合并/dev/sda2与/dev/sdb3失败求助:提示fuse设备未找到

Fixing "mhddfs fuse: device not found, try 'modpd fuse' first" Error

Hey there, let's work through this mhddfs issue step by step. First off, that error message has a tiny typo—modpd should be modprobe—but let's cover all bases to get your partitions merged properly.

Step 1: Load the FUSE Kernel Module

The error is pointing out that the FUSE kernel module (which mhddfs depends on) isn't loaded. Run the corrected command first:

sudo modprobe fuse

To confirm it loaded successfully, check with:

lsmod | grep fuse

You should see a line containing fuse in the output if it worked.

Step 2: Verify (or Create) the FUSE Device Node

If loading the module doesn't fix things, the /dev/fuse device node might be missing. Let's check:

ls -l /dev/fuse

If this returns "No such file or directory", create the node manually:

sudo mknod /dev/fuse c 10 229
sudo chmod 666 /dev/fuse

The c 10 229 specifies it's a character device with the standard major/minor numbers for FUSE.

Step 3: Double-Check Your mhddfs Command

Make sure you're using the right syntax and have proper permissions:

  1. First, create a mount point if you haven't already:
    sudo mkdir -p /mnt/combined_storage
    
  2. Run mhddfs with sudo (mounting requires root privileges) and specify your partitions correctly:
    sudo mhddfs /dev/sda2,/dev/sdb3 /mnt/combined_storage
    
    Important Note: If either /dev/sda2 or /dev/sdb3 is already mounted elsewhere, use their existing mount paths instead of the device names. For example, if /dev/sda2 is mounted at /mnt/sda2 and /dev/sdb3 at /mnt/sdb3, the command becomes:
    sudo mhddfs /mnt/sda2,/mnt/sdb3 /mnt/combined_storage
    

Step 4: Troubleshoot Further If Issues Persist

  • Reinstall mhddfs and FUSE: Corrupted installations can cause odd behavior. On Debian/Ubuntu-based systems:
    sudo apt remove --purge mhddfs fuse
    sudo apt install mhddfs fuse
    
  • Check kernel compatibility: Most modern kernels support FUSE out of the box, but if you're running an older custom kernel, you may need to enable FUSE support during kernel compilation.

内容的提问来源于stack exchange,提问作者Adi Mandala Putra

相关产品推荐
方舟 Agent Plan

超全模态模型 × Harness 升级,最新支持 Deepseek-V4.1-Flash、GLM-5.3 系列、Doubao-Seedream-5.0-pro、Kimi-K3 (部分), 限时 9.9 元起

最近更新时间:2026.05.19 04:34:46