iOS Zoom SDK示例项目x86_64架构缺失导致链接错误求助

I’ve run into this exact architecture issue with the Zoom iOS SDK before, so here are some practical steps to fix that warning and the associated linker errors:

1. Verify the SDK’s supported architectures #

First, confirm if your downloaded Zoom SDK actually includes the x86_64 architecture (used for iOS simulators). Some SDK variants might only support arm64 (for physical devices). To check, run this command in Terminal:

lipo -info ../lib/mobileRTC.framework/mobileRTC

If the output doesn’t list x86_64, head to the Zoom Developer Portal and download the full SDK package that includes both simulator and device architectures—make sure you don’t grab a "device-only" build.

2. Adjust your project’s architecture settings #

• Open your project’s Build Settings and locate the Architectures section. If you’re on Xcode 12+, the Valid Architectures option might be hidden; you can add it back as a user-defined setting. Ensure x86_64 is included in the list.
• Check the Build Active Architecture Only setting: For Debug builds, it’s usually set to YES, but if the error persists, try switching it to NO to force Xcode to compile for all supported architectures.

3. Double-check framework embedding #

Linking the framework isn’t enough—you need to embed it correctly too:

• Go to your target’s General tab, find Frameworks, Libraries, and Embedded Content.
• Set the mobileRTC.framework to Embed & Sign. If it was set to Do Not Embed before, this could be the root cause.
• Also confirm the framework path is correct: The warning points to ../lib/mobileRTC.framework, so make sure this relative path exists and the framework file isn’t corrupted. Re-add the framework if needed to fix path issues.

4. Clean cache and rebuild #

Old build cache can sometimes cause mismatched architecture issues:

• Run Product > Clean Build Folder (use the shortcut Shift + Command + K).
• Delete your project’s Derived Data: Go to Xcode > Preferences > Locations, click the arrow next to the Derived Data path, and delete the folder for your project.
• Rebuild the project after these steps.

If you’re using CocoaPods to integrate the Zoom SDK, double-check your Podfile for the correct SDK version, run pod deintegrate followed by pod install to refresh the integration.

内容的提问来源于stack exchange，提问作者Ali Barış Uzuner