R语言编写循环调整相邻点坡度至满足最大阈值条件的脚本
R语言坡度合规高程自动调整需求
我希望编写一段R语言脚本,重复执行条件测试或调整函数,直到所有坡度值均满足指定要求;此前我可通过复制粘贴代码实现该逻辑,但该方式操作繁琐易出错。
更新说明:我此前曾用模拟数据和模拟条件提问,但始终未能解决问题,以下为实际业务场景需求:我需要调整同一序列内多个相邻点之间的坡度,生成满足坡度小于0.02要求的平滑高程序列。
初始参数与业务数据
# 初始参数定义: NS_max_slope <- 0.02 # NS即南北向坡度:北向坡度为正值,南向坡度为负值,本次仅校验北向坡度的合规性 # 业务数据结构 Z LF_IN_1 old_z_1 NS_slope include 1 285.2573 NA NA NA NA 2 285.2283 16.4147 285.2573 -0.001766709 -0.001766709 3 285.154 24.3543 285.2283 -0.003050796 -0.003050796 4 285.0791 24.3543 285.154 -0.003075432 -0.003075432 5 283 24.3544 285.0791 -0.085368558 -0.085368558 6 284.8716 19.0761 283 0.098112298 0.098112298 7 284.8364 19.0761 284.8716 -0.001845241 -0.001845241 8 284.788 24.3543 284.8364 -0.001987329 -0.001987329 9 284.7599 24.3544 284.788 -0.001153796 -0.001153796 10 284.9187 24.3543 284.7599 0.006520409 0.006520409 11 285 16.4147 284.9187 0.004952878 0.004952878 12 280 215.3846194 285 -0.023214285 NA
坡度校验功能(slope_check())
判断相邻两点间的坡度是否超限,超限规则为*坡度值大于NS_max_slope(0.02)*即为不达标:
fail_slope <- c() fail_slope_na <- c() fail_slope_no <- c() fail_slope_yes <- c() slope_check <- function(slope){ for (s in slope) { if (is.na(s)) { fail_slope_na <- NA fail_slope <- c(fail_slope, fail_slope_na) } else if (s <= NS_max_slope) { fail_slope_no <- "NO" fail_slope <- c(fail_slope, fail_slope_no) } else { fail_slope_yes <- "YES" fail_slope <- c(fail_slope, fail_slope_yes) } } return(fail_slope) }
高程调整功能(elev_adj())
对经坡度校验判定为超限的点位高程进行调整:
new_slope <- c() new_slope_na <- c() new_slope_no <- c() new_slope_yes <- c() new_slope_counter <- 1 elev_adj <- function(data) { for (sf in data$slope_fail) { if (is.na(sf)) { new_slope_na <- data$Z[new_slope_counter] new_slope <- c(new_slope, new_slope_na) new_slope_counter <- new_slope_counter + 1 } else if (sf == "NO") { new_slope_no <- data$Z[new_slope_counter] new_slope <- c(new_slope, new_slope_no) new_slope_counter <- new_slope_counter + 1 } else { new_slope_yes <- lag_z[new_slope_counter] + data$LF_IN_1[new_slope_counter] * NS_max_slope new_slope <- c(new_slope, new_slope_yes) new_slope_counter <- new_slope_counter + 1 } } return(new_slope) }
迭代执行功能(elev_adjust())
循环调用slope_check()和elev_adj()函数,直到所有点位的坡度都满足合规要求。
示例:第6行坡度值为0.098,远大于0.02的最大坡度阈值,需将对应高程传入elev_adj()函数调整(首次调整后该点位高程为280.3283);该高程调整完成后,第7行的坡度会触发slope_check()判定为超限,也需传入elev_adj()函数调整,如此持续迭代直到所有坡度均满足条件。
当前初步实现的迭代函数逻辑如下:
elev_adjust <- function(data) { ## 坡度超限校验 slope_check_df <- data %>% mutate(slope_fail = slope_check(slope = include)) # 坡度调整 iteration_1 <- slope_check_df %>% mutate(elev_adjust_1 = elev_adj(data = slope_check_df), elev_adjust_lag_1 = lag(elev_adjust_1), slope_adj_1 = (elev_adjust_1 - elev_adjust_lag_1) / LF_IN_1, slope_check_1 = slope_check(slope_adj_1)) iteration_1 }
当前实现难点
所有调整逻辑依赖前一行的计算结果,无法通过直接计算完成全流程迭代,需要相关实现思路与代码指导。
内容的提问来源于stack exchange,提问作者strockerik
相关产品推荐
相关产品推荐

