如何使用VBA发送Shift+右键Ctrl组合按键？

完全可行，针对特殊应用，直接用SendKeys往往不够可靠，推荐通过Windows API实现硬件级别的按键模拟，以下是具体实现：

方法一：模拟Shift+Ctrl+右键点击 #

先在模块中声明必要的API函数和常量，然后编写执行子程序：

' 64位Office版本声明
Declare PtrSafe Sub keybd_event Lib "user32.dll" (ByVal bVk As Byte, ByVal bScan As Byte, ByVal dwFlags As Long, ByVal dwExtraInfo As LongPtr)
Declare PtrSafe Sub mouse_event Lib "user32.dll" (ByVal dwFlags As Long, ByVal dx As Long, ByVal dy As Long, ByVal cButtons As Long, ByVal dwExtraInfo As LongPtr)

' 32位Office版本请用下面的声明
' Declare Sub keybd_event Lib "user32.dll" (ByVal bVk As Byte, ByVal bScan As Byte, ByVal dwFlags As Long, ByVal dwExtraInfo As Long)
' Declare Sub mouse_event Lib "user32.dll" (ByVal dwFlags As Long, ByVal dx As Long, ByVal dy As Long, ByVal cButtons As Long, ByVal dwExtraInfo As Long)

' 按键与鼠标事件常量
Const VK_SHIFT = &H10
Const VK_CONTROL = &H11
Const MOUSEEVENTF_RIGHTDOWN = &H8
Const MOUSEEVENTF_RIGHTUP = &H10
Const KEYEVENTF_KEYUP = &H2

Sub SimulateShiftCtrlRightClick()
    ' 先激活目标应用窗口（替换为你的应用标题）
    AppActivate "目标应用窗口标题"
    
    ' 按下Shift和Ctrl键
    keybd_event VK_SHIFT, 0, 0, 0
    keybd_event VK_CONTROL, 0, 0, 0
    
    ' 模拟右键按下+抬起
    mouse_event MOUSEEVENTF_RIGHTDOWN, 0, 0, 0, 0
    mouse_event MOUSEEVENTF_RIGHTUP, 0, 0, 0, 0
    
    ' 松开Shift和Ctrl键（顺序与按下相反）
    keybd_event VK_CONTROL, 0, KEYEVENTF_KEYUP, 0
    keybd_event VK_SHIFT, 0, KEYEVENTF_KEYUP, 0
End Sub

方法二：针对特殊的“右键Ctrl键” #

如果你的应用中的“右键Ctrl键”是自定义按键（而非常规右键点击），需要先获取该按键对应的虚拟键码（可以用按键检测工具抓取），然后替换上述代码中的VK_CONTROL为对应值，保留Shift的按下逻辑即可。

注意事项 #

• 执行前务必确保目标应用处于前台激活状态，否则按键会发送到当前激活窗口。
• 如果运行时出现权限问题，尝试以管理员身份打开Office程序。

内容的提问来源于stack exchange，提问作者childofsai