Xcode根据构建配置加载指定配置文件问题求助

一、修复Build Phase脚本的逻辑错误 #

你的脚本中if条件判断存在语法问题，导致始终进入else分支，同时变量引用和空格规范也需要修正：

错误点说明 #

1. 条件判断的逻辑或写法错误：原脚本用|作为逻辑或，这是管道符，bash中应使用-o（单中括号场景）或||（双中括号场景）。
2. 中括号前后缺少空格：[和]是bash的test命令符号，前后必须加空格，否则会被当作字符串处理，导致条件判断失效。
3. 变量未加双引号：当路径或变量包含空格时会引发错误，建议给所有路径变量添加双引号。

修正后的完整脚本 #

# Name of the resource to copy
INFO_PLIST_FILE=GoogleService-Info.plist

# Get references to debug and release versions of the plist file
DEBUG_INFO_PLIST_FILE="${PROJECT_DIR}/${TARGET_NAME}/Firebase/Debug/${INFO_PLIST_FILE}"
RELEASE_INFO_PLIST_FILE="${PROJECT_DIR}/${TARGET_NAME}/Firebase/Release/${INFO_PLIST_FILE}"

# Make sure the debug version exists
echo "Looking for ${INFO_PLIST_FILE} in ${DEBUG_INFO_PLIST_FILE}"
if [ ! -f "$DEBUG_INFO_PLIST_FILE" ] ; then
    echo "File GoogleService-Info.plist (debug) not found."
    exit 1
fi

# Make sure the release version exists
echo "Looking for ${INFO_PLIST_FILE} in ${RELEASE_INFO_PLIST_FILE}"
if [ ! -f "$RELEASE_INFO_PLIST_FILE" ] ; then
    echo "File GoogleService-Info.plist (release) not found."
    exit 1
fi

# Get a reference to the destination location for the plist file
PLIST_DESTINATION="${BUILT_PRODUCTS_DIR}/${PRODUCT_NAME}.app"

echo "Copying ${INFO_PLIST_FILE} to final destination: ${PLIST_DESTINATION}"

# Copy the appropriate file to app bundle
if [[ "${CONFIGURATION}" == "dev.debug" || "${CONFIGURATION}" == "dev.release" ]] ; then
    echo "File ${DEBUG_INFO_PLIST_FILE} copied"
    cp "${DEBUG_INFO_PLIST_FILE}" "${PLIST_DESTINATION}"
else
    echo "File ${RELEASE_INFO_PLIST_FILE} copied"
    cp "${RELEASE_INFO_PLIST_FILE}" "${PLIST_DESTINATION}"
fi

二、解决Bundle ID不一致问题 #

出现的提示说明Xcode项目Bundle ID与对应GoogleService-Info.plist中的Bundle ID不匹配，需按以下步骤修正：

• 分别打开Debug/GoogleService-Info.plist和Release/GoogleService-Info.plist，检查BUNDLE_ID字段的具体值。
• 打开Xcode项目，进入TARGETS -> 你的应用目标 -> Build Settings，搜索Bundle Identifier。
• 确认dev.debug配置下的Bundle ID与Debug版plist的BUNDLE_ID完全一致，dev.release（或其他Release类配置）与Release版plist的BUNDLE_ID完全一致。

内容的提问来源于stack exchange，提问作者hugger