WireMock多用户登录切换场景配置问题求助及解决方案

我正在用WireMock模拟GraphQL服务器，需要实现「先注销User 1、再登录User 2」的流程，知道可以通过WireMock的scenario功能实现，但我的配置代码无法正常运行。初始配置代码如下：

初始配置 #

登录User 1 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "Started",
  "newScenarioState": "User 1",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "User1"
          }
      }
  },
  "response": {
      "status": 200,
      "bodyFileName": "User1.json"
  }
}

注销 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "User 1",
  "newScenarioState": "Started",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "Logout"
          }
      }
  },
  "response": {
      "status": 200,
      "bodyFileName": "Logout.json"
  }
}

登录User 2 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "Log out",
  "newScenarioState": "User 2",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "User2"
          }
      }
  },
  "response": {
      "status": 200,
      "bodyFileName": "User2.json"
  }
}

请问有人知道问题出在哪里吗？

更新：问题已解决 #

结合agoff的修改建议，我做了以下调整后配置正常运行：

• 移除了User 1和User 2配置中的newScenarioState字段
• 将User 2登录的响应状态码改为201

修正后的代码如下：

登录User 1 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "Started",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "User1"
          }
      }
  },
  "response": {
      "status": 200,
      "bodyFileName": "User1.json"
  }
}

注销 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "Started",
  "newScenarioState": "Logout",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "Logout"
          }
      }
  },
  "response": {
      "status": 200,
      "bodyFileName": "Logout.json"
  }
}

登录User 2 #

{
  "scenarioName": "Test scenario",
  "requiredScenarioState": "Log out",
  "request": {
      "method": "POST",
      "url": "/graphql-url",
      "headers": {
          "X-APOLLO-OPERATION-NAME": {
              "equalTo": "User2"
          }
      }
  },
  "response": {
      "status": 201,
      "bodyFileName": "User2.json"
  }
}

内容的提问来源于stack exchange，提问作者user2415183