升级Xcode14.3与iOS16.4后Flutter项目无法安装Runner求助

将Xcode升级至14.3、iPhone系统升级至iOS16.4后，Flutter项目无法在iOS16.4设备上安装Runner，但在iOS14设备上可正常工作。报错详情如下：

Unable to install "Runner"
Domain: com.apple.dt.MobileDeviceErrorDomain
Code: -402653179
User Info: {
DVTErrorCreationDateKey = "2023-04-03 09:24:05 +0000";
IDERunOperationFailingWorker = IDEInstalliPhoneLauncher;
}

Could not write to the device.
Domain: com.apple.dt.MobileDeviceErrorDomain
Code: -402653179
User Info: {
DVTRadarComponentKey = 261622;
MobileDeviceErrorCode = "(0xE8000005)";
"com.apple.dtdevicekit.stacktrace" = (
0   DTDeviceKitBase                     0x000000010c8a4b1c DTDKCreateNSErrorFromAMDErrorCode + 300
1   DTDeviceKitBase                     0x000000010c8d9000 __90-[DTDKMobileDeviceToken installApplicationBundleAtPath:withOptions:andError:withCallback:]_block_invoke + 136
2   DVTFoundation                       0x0000000103927ac8 DVTInvokeWithStrongOwnership + 76
3   DTDeviceKitBase                     0x000000010c8d8d7c -[DTDKMobileDeviceToken installApplicationBundleAtPath:withOptions:andError:withCallback:] + 1208
4   IDEiOSSupportCore                   0x000000010cea7ce8 __118-[DVTiOSDevice(DVTiPhoneApplicationInstallation) processAppInstallSet:appUninstallSet:installOptions:completionBlock:]_block_invoke.147 + 2340
5   DVTFoundation                       0x0000000103a32428 __DVT_CALLING_CLIENT_BLOCK__ + 16
6   DVTFoundation                       0x0000000103a32e94 __DVTDispatchAsync_block_invoke + 152
7   libdispatch.dylib                   0x00000001ace6a874 _dispatch_call_block_and_release + 32
8   libdispatch.dylib                   0x00000001ace6c400 _dispatch_client_callout + 20
9   libdispatch.dylib                   0x00000001ace73a88 _dispatch_lane_serial_drain + 668
10  libdispatch.dylib                   0x00000001ace745f8 _dispatch_lane_invoke + 384
11  libdispatch.dylib                   0x00000001ace7f244 _dispatch_workloop_worker_thread + 648
12  libsystem_pthread.dylib             0x00000001ad018074 _pthread_wqthread + 288
13  libsystem_pthread.dylib             0x00000001ad016d94 start_wqthread + 8
);
}

Analytics Event: com.apple.dt.IDERunOperationWorkerFinished : {
"device_model" = "iPhone12,1";
"device_osBuild" = "16.4 (20E247)";
"device_platform" = "com.apple.platform.iphoneos";
"launchSession_schemeCommand" = Run;
"launchSession_state" = 1;
"launchSession_targetArch" = arm64;
"operation_duration_ms" = 2722;
"operation_errorCode" = "-402653179";
"operation_errorDomain" = "com.apple.dt.MobileDeviceErrorDomain";
"operation_errorWorker" = IDEInstalliPhoneLauncher;
"operation_name" = IDEiPhoneRunOperationWorkerGroup;
"param_consoleMode" = 0;
"param_debugger_attachToExtensions" = 0;
"param_debugger_attachToXPC" = 1;
"param_debugger_type" = 5;
"param_destination_isProxy" = 0;
"param_destination_platform" = "com.apple.platform.iphoneos";
"param_diag_MainThreadChecker_stopOnIssue" = 0;
"param_diag_MallocStackLogging_enableDuringAttach" = 0;
"param_diag_MallocStackLogging_enableForXPC" = 1;
"param_diag_allowLocationSimulation" = 1;
"param_diag_checker_tpc_enable" = 1;
"param_diag_gpu_frameCapture_enable" = 0;
"param_diag_gpu_shaderValidation_enable" = 0;
"param_diag_gpu_validation_enable" = 0;
"param_diag_memoryGraphOnResourceException" = 0;
"param_diag_queueDebugging_enable" = 1;
"param_diag_runtimeProfile_generate" = 0;
"param_diag_sanitizer_asan_enable" = 0;
"param_diag_sanitizer_tsan_enable" = 0;
"param_diag_sanitizer_tsan_stopOnIssue" = 0;
"param_diag_sanitizer_ubsan_stopOnIssue" = 0;
"param_diag_showNonLocalizedStrings" = 0;
"param_diag_viewDebugging_enabled" = 1;
"param_diag_viewDebugging_insertDylibOnLaunch" = 1;
"param_install_style" = 0;
"param_launcher_UID" = 2;
"param_launcher_allowDeviceSensorReplayData" = 0;
"param_launcher_kind" = 0;
"param_launcher_style" = 0;
"param_launcher_substyle" = 0;
"param_runnable_appExtensionHostRunMode" = 0;
"param_runnable_productType" = "com.apple.product-type.application";
"param_testing_launchedForTesting" = 0;
"param_testing_suppressSimulatorApp" = 0;
"param_testing_usingCLI" = 0;
"sdk_canonicalName" = "iphoneos16.4";
"sdk_osVersion" = "16.4";
"sdk_variant" = iphoneos;
}
System Information

macOS Version 13.3 (Build 22E252)
Xcode 14.3 (21812) (Build 14E222b)

针对错误码0xE8000005（无法写入设备），按以下步骤逐一排查修复：

• 清理项目缓存并重建

  1. 在Flutter项目根目录执行：

     flutter clean
     flutter pub get
     

  2. 打开Xcode，执行Product > Clean Build Folder（快捷键Cmd+Shift+K），之后重新编译运行项目。

• 验证设备信任与权限

  1. 确保iPhone通过USB连接Mac时，已在设备端选择“信任此电脑”。
  2. 进入iPhone设置 > 通用 > VPN与设备管理，找到你的开发者账号，点击信任对应的应用签名。

• 升级Flutter至兼容版本
  Xcode14.3对Flutter版本有适配要求，执行以下命令升级到最新稳定版：

  flutter upgrade
  

  若稳定版仍存在问题，可尝试切换到beta通道（专门适配Xcode14.3的版本）：

  flutter channel beta
  flutter upgrade
  

• 调整Xcode构建设置

  1. 打开项目iOS目录下的Runner.xcworkspace。
  2. 选中Runner目标，进入Build Settings：
     • 将Build Libraries for Distribution设置为NO。
     • 确认Architectures为Standard Architectures (arm64)，移除多余架构配置。
  3. 切换到Signing & Capabilities，检查团队、Bundle ID设置正确，且“自动管理签名”已开启。

• 重置设备连接服务

  1. 断开iPhone与Mac的USB连接，关闭Xcode。
  2. 在Mac终端执行：

     sudo killall -9 com.apple.CoreSimulator.CoreSimulatorService
     sudo killall -9 usbmuxd
     

  3. 重启iPhone，重新连接后打开Xcode尝试运行。

• 检查设备存储空间
  设备存储空间不足也会触发该错误，进入iPhone设置 > 通用 > iPhone储存空间，确保有足够空间安装应用。

内容的提问来源于stack exchange，提问作者Noah