Xcode运行Swift应用至iPhone模拟器遇Pseudo Terminal Setup Error(7/6)

问题场景 #

使用Xcode 14.3在MacOS 13.3.1系统上，通过iPhone 12 Pro（iOS 16）模拟器启动Swift应用时，触发Pseudo Terminal Setup Error，错误核心信息为：

• 错误域：IDEPseudoTerminalDomain，代码7
• 关联错误：NSPOSIXErrorDomain，代码6，提示Device not configured

已尝试过重启Xcode、清理缓存、更换其他模拟器，问题未解决。

错误截图：

完整错误日志：

Details

Pseudo Terminal Setup Error
Domain: IDEPseudoTerminalDomain
Code: 7
Failure Reason: ErrorCode: 7 Errno: 6
User Info: {
    DVTErrorCreationDateKey = "2023-05-17 14:05:21 +0000";
    IDERunOperationFailingWorker = IDELaunchiPhoneSimulatorLauncher;
}
--
The operation couldn’t be completed. Device not configured
Domain: NSPOSIXErrorDomain
Code: 6
Failure Reason: Device not configured
--

Analytics Event: com.apple.dt.IDERunOperationWorkerFinished : {
    "device_model" = "iPhone13,3";
    "device_osBuild" = "16.4 (20E247)";
    "device_platform" = "com.apple.platform.iphonesimulator";
    "launchSession_schemeCommand" = Run;
    "launchSession_state" = 1;
    "launchSession_targetArch" = arm64;
    "operation_duration_ms" = 50;
    "operation_errorCode" = 7;
    "operation_errorDomain" = IDEPseudoTerminalDomain;
    "operation_errorWorker" = IDELaunchiPhoneSimulatorLauncher;
    "operation_name" = IDERunOperationWorkerGroup;
    "param_consoleMode" = 0;
    "param_debugger_attachToExtensions" = 0;
    "param_debugger_attachToXPC" = 1;
    "param_debugger_type" = 3;
    "param_destination_isProxy" = 0;
    "param_destination_platform" = "com.apple.platform.iphonesimulator";
    "param_diag_MainThreadChecker_stopOnIssue" = 0;
    "param_diag_MallocStackLogging_enableDuringAttach" = 0;
    "param_diag_MallocStackLogging_enableForXPC" = 1;
    "param_diag_allowLocationSimulation" = 1;
    "param_diag_checker_tpc_enable" = 1;
    "param_diag_gpu_frameCapture_enable" = 0;
    "param_diag_gpu_shaderValidation_enable" = 0;
    "param_diag_gpu_validation_enable" = 0;
    "param_diag_memoryGraphOnResourceException" = 0;
    "param_diag_queueDebugging_enable" = 1;
    "param_diag_runtimeProfile_generate" = 0;
    "param_diag_sanitizer_asan_enable" = 0;
    "param_diag_sanitizer_tsan_enable" = 0;
    "param_diag_sanitizer_tsan_stopOnIssue" = 0;
    "param_diag_sanitizer_ubsan_stopOnIssue" = 0;
    "param_diag_showNonLocalizedStrings" = 0;
    "param_diag_viewDebugging_enabled" = 1;
    "param_diag_viewDebugging_insertDylibOnLaunch" = 1;
    "param_install_style" = 0;
    "param_launcher_UID" = 2;
    "param_launcher_allowDeviceSensorReplayData" = 0;
    "param_launcher_kind" = 0;
    "param_launcher_style" = 0;
    "param_launcher_substyle" = 0;
    "param_runnable_appExtensionHostRunMode" = 0;
    "param_runnable_productType" = "com.apple.product-type.application";
    "param_testing_launchedForTesting" = 0;
    "param_testing_suppressSimulatorApp" = 0;
    "param_testing_usingCLI" = 0;
    "sdk_canonicalName" = "iphonesimulator16.4";
    "sdk_osVersion" = "16.4";
    "sdk_variant" = iphonesimulator;
}
--


System Information

macOS Version 13.3.1 (Build 22E261)
Xcode 14.3 (21812) (Build 14E222b)
Timestamp: 2023-05-17T22:05:21+08:00

解决步骤 #

• 重置iOS模拟器：打开模拟器，点击顶部菜单栏模拟器 > 内容和设置 > 重置所有内容和设置，确认后重启模拟器，再尝试运行项目
• 检查并授予完全磁盘访问权限：打开系统设置 > 隐私与安全性 > 完全磁盘访问权限，确保Xcode和终端（Terminal）均已开启权限，完成后重启Mac
• 清理模拟器与Xcode缓存并重启服务：打开终端执行以下命令：

  killall -9 com.apple.CoreSimulator.CoreSimulatorService
  rm -rf ~/Library/Developer/CoreSimulator/Devices
  rm -rf ~/Library/Developer/Xcode/DerivedData
  

  执行完成后重启Mac，重新打开Xcode运行项目
• 重新安装模拟器组件：打开Xcode，点击Xcode > 设置 > 平台，找到对应版本的iOS模拟器，点击删除后重新下载安装
• 检查系统完整性保护状态：在终端执行csrutil status，若显示关闭状态，需重启Mac到恢复模式，执行csrutil enable开启系统完整性保护，之后重启系统

内容的提问来源于stack exchange，提问作者DumplingDius