如何生成高位有效、右侧补零格式的以太坊私钥

当前代码生成的以太坊私钥为低位有效、左侧补零格式，需修改为高位有效、右侧补零格式（示例：0x7af2cd5900000000000000000000000000000000000000000000000000000000）。

修改步骤 #

1. 定位代码中生成私钥的核心行：

   private_key ="{:064x}".format(h)
   

2. 将其替换为：

   private_key = "{:x}".format(h).ljust(64, '0')
   

   说明：
   • "{:x}".format(h)：将整数h转换为无前导零的十六进制字符串，保留高位有效数字
   • .ljust(64, '0')：将字符串左对齐，右侧补零至64位长度，实现右侧补零的要求

如果需要让私钥带上0x前缀（与示例格式完全匹配），可修改为：

private_key = "0x" + "{:x}".format(h).ljust(64, '0')

注意：需确认后续utils.privtoaddr函数是否接受带0x前缀的私钥，若原函数要求无前缀则保留不带0x的版本。

修改后的完整代码 #

import pyetherbalance
#from etherscan.accounts import Account
from ethereum import utils
#import os
import time
import secrets
import random
#import sys

dosya4 = open("hacker_address.txt", "r")
start= time.time()
for toplam in range(1234567890):
  zaman = time.time() - start
  h=random.randint(1,10000000)
  
  h1 = h+0
  while (h<=h1):   
    # 修改私钥生成逻辑为高位有效、右侧补零
    private_key = "{:x}".format(h).ljust(64, '0')
    # 若需要带0x前缀，使用下面这行替换上面的行
    # private_key = "0x" + "{:x}".format(h).ljust(64, '0')
    
    raw_address = utils.privtoaddr(private_key)
    
    account_address= (utils.checksum_encode(raw_address)).lower()
    dosya4.seek(0)
    #account_address = "0x267F70f9B856de226FEa5FC1B0a8E319c72CEff5"
    aranan_varmi = dosya4.read().find(account_address)
    infura_url = ''
    balance = pyetherbalance.PyEtherBalance(infura_url)
    balance_eth = balance.get_eth_balance(account_address)
    
    if aranan_varmi != - 1 :
      print("ahaaaaa esleme varrr")
      dosya2 = open("eslesme.txt", "a")
      dosya2.write(private_key+" "+account_address+ "\n")
      dosya2.close()
      print("Private key:"+private_key)
      print("Address:"+account_address)
      time.sleep(5)
    else:
      print (private_key, account_address, balance_eth)
      if balance_eth['balance'] > 0:
        print("EUREKA...EUREKA...EUREKA...")
        print(private_key, account_address, balance_eth,
      file=open("eslesme.txt", "a"))
        #sys.exit()

    h=h+1
  #print("***********************************************")
dosya4.close()
print ("toplam zaman %s saniye" % zaman)

内容的提问来源于stack exchange，提问作者Jessica May