Windows10下Python Telnet重复发送命令失败问题求助

• 环境：Windows 10 系统、Python 3.10.11
• 现象：通过Telnet连接设备重复执行同一命令两次，仅第一次能正常执行并得到预期响应；第二次命令仅部分传输至设备，响应字符随机缺失，甚至会出现程序无限阻塞。
• 已尝试操作：
  • 调整sleep时长、更换读取方式，均未解决问题
  • 更换另一同型号网络适配器（Realtek USB GbE Family Controller #4）后可正常运行
  • 同事使用Windows 11连接同一设备无此问题

原始代码 #

import time
import telnetlib

def read(session, timeout=1):
    received = b""
    t0 = time.time()
    while time.time() - t0 < timeout:
        data = session.read_very_eager()
        if data:
            received += data
            t0 = time.time()
    return received.decode()

def write_and_read(session, command):
    time.sleep(1)
    session.write(command.encode() + b"\r\n")
    time.sleep(1)
    reply = read(session)
    print(reply)


session = telnetlib.Telnet("192.168.200.10", 9000, 20)
command = "$SENSOR,STATUS,192.168.200.53"

write_and_read(session, command)
write_and_read(session, command)

原始执行输出 #

Requesting radar report from 192.168.200.53...
Failed to query sensor. Is the IP correct? Is the sensor powered?

$SENSOR,STATUS,192.168

修改后的代码及输出、调试输出 #

[此处保留用户提供的其余代码及输出内容]

内容的提问来源于stack exchange，提问作者Alex