在Ubuntu 22.04.3 LTS构建LineageOS 20.0时libaptX_encoder缺失错误求助

错误详情 #

构建环境：Ubuntu 22.04.3 LTS，目标设备star2lte，LineageOS 20.0

构建过程中输出的环境信息：

============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=13
LINEAGE_VERSION=20.0-20230817-UNOFFICIAL-star2lte
TARGET_PRODUCT=lineage_star2lte
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=cortex-a53
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv8-a
TARGET_2ND_CPU_VARIANT=cortex-a53
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-6.2.0-26-generic-x86_64-Ubuntu-22.04.3-LTS
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=TQ3A.230805.001
OUT_DIR=out
PRODUCT_SOONG_NAMESPACES=vendor/samsung/exynos9810-common device/samsung/exynos9810-common hardware/google/interfaces hardware/google/pixel hardware/samsung hardware/samsung/aidl/power-libperfmgr vendor/samsung/star2lte
============================================

核心错误输出：

[100% 398/398] 分析Android.bp文件并在out/soong/build.ninja生成ninja文件
FAILED: out/soong/build.ninja
cd "$(dirname "out/host/linux-x86/bin/soong_build")" && BUILDER="$PWD/$(basename "out/host/linux-x86/bin/soong_build")" && cd / && env -i  "$BUILDER"     --top "$TOP"     --soong_out "out/soong"     --out "out"     -o out/soong/build.ninja --globListDir build --globFile out/soong/globs-build.ninja -t -l out/.module_paths/Android.bp.list --available_env out/soong/soong.environment.available --used_env out/soong/soong.environment.used.build Android.bp
error: vendor/samsung/exynos9810-common/Android.bp:1867:1: 模块"libaptX_encoder"变体"android_arm64_armv8-a_cortex-a53_shared": 模块源路径"vendor/samsung/exynos9810-common/proprietary/product/lib64/libaptX_encoder.so"不存在
11:07:51 soong初始化失败，退出状态码: 1

部分构建目标失败（耗时42秒）

解决步骤 #

• 补全缺失的专有二进制文件
  该错误是由于三星设备的专有库libaptX_encoder.so未被正确提取到构建目录：

  1. 从运行LineageOS的star2lte设备中，使用adb pull /product/lib64/libaptX_encoder.so命令，将文件复制到本地构建目录的vendor/samsung/exynos9810-common/proprietary/product/lib64/路径下。
  2. 若使用官方固件包，解压product分区镜像，找到对应文件并复制到上述路径。

• 验证Android.bp路径配置
  打开vendor/samsung/exynos9810-common/Android.bp，定位到1867行的libaptX_encoder模块配置，确认srcs字段中的文件路径与实际存放位置一致，有错误则修正。

• 清理缓存并重新构建
  执行以下命令重置构建环境后重新开始编译：

  make clean
  source build/envsetup.sh
  lunch lineage_star2lte-eng
  m -j$(nproc)
  

内容的提问来源于stack exchange，提问作者Dev Mayele