VisionFive2 Debian运行Docker失败，求内核bridge/br_netfilter配置选项

我在VisionFive2上安装了Debian系统，运行Docker时出现如下错误：

user@starfive:~$ sudo dockerd 

WARN[2024-03-02T13:08:27.753708638Z] Unable to find memory controller             
WARN[2024-03-02T13:08:27.753772888Z] Unable to find io controller                 
WARN[2024-03-02T13:08:27.753885889Z] Unable to find cpuset controller             
WARN[2024-03-02T13:08:27.753972639Z] Unable to find pids controller                
INFO[2024-03-02T13:08:27.755205397Z] Loading containers: start.                   
WARN[2024-03-02T13:08:27.763888949Z] Running modprobe bridge br_netfilter failed with message: modprobe: WARNING: Module bridge not found in directory /lib/modules/5.15.0-starfive
modprobe: WARNING: Module br_netfilter not found in directory /lib/modules/5.15.0-starfive
, error: exit status 1 
WARN[2024-03-02T13:08:27.921853397Z] Could not load necessary modules for IPSEC rules: protocol not supported 
INFO[2024-03-02T13:08:27.943487527Z] Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address 
INFO[2024-03-02T13:08:27.970871192Z] [core] Channel Connectivity change to SHUTDOWN  module=grpc
INFO[2024-03-02T13:08:27.971098693Z] [core] Subchannel Connectivity change to SHUTDOWN  module=grpc
INFO[2024-03-02T13:08:27.971636946Z] stopping event stream following graceful shutdown  error="<nil>" module=libcontainerd namespace=moby
INFO[2024-03-02T13:08:27.972497202Z] stopping event stream following graceful shutdown  error="context canceled" module=libcontainerd namespace=plugins.moby
INFO[2024-03-02T13:08:27.972850954Z] stopping healthcheck following graceful shutdown  module=libcontainerd
INFO[2024-03-02T13:08:27.973038955Z] [core] Channel Connectivity change to SHUTDOWN  module=grpc
INFO[2024-03-02T13:08:27.973209706Z] [core] Subchannel Connectivity change to SHUTDOWN  module=grpc
INFO[2024-03-02T13:08:27.973820710Z] [core] Subchannel Connectivity change to CONNECTING  module=grpc
INFO[2024-03-02T13:08:27.974033461Z] [core] Channel Connectivity change to CONNECTING  module=grpc
INFO[2024-03-02T13:08:27.974120461Z] [core] Subchannel picks a new address "unix:///var/run/docker/containerd/containerd.sock" to connect  module=grpc
failed to start daemon: Error initializing network controller: Error creating default "bridge" network: package not installed

打算重新编译Linux内核，请问执行make menuconfig时需要启用哪些选项来支持bridge和br_netfilter模块？

所需内核配置选项 #

• 启用bridge模块：
  路径：Networking support -> Networking options -> 802.1d Ethernet Bridging
  配置：设置为M（编译为模块）或Y（编译进内核），推荐选M方便灵活加载。对应内核配置项：CONFIG_BRIDGE

• 启用br_netfilter模块：
  路径：Networking support -> Networking options -> Network packet filtering framework (Netfilter) -> Core Netfilter Configuration -> Bridged IP/ARP packets filtering
  配置：设置为M或Y，对应内核配置项：CONFIG_BRIDGE_NETFILTER

可选但推荐的Docker相关配置 #

为确保Docker网络功能完整，建议同时启用以下选项：

• Networking support -> Networking options -> Network packet filtering framework (Netfilter) -> IP: Netfilter Configuration -> iptables support（CONFIG_IP_NF_IPTABLES）
• Networking support -> Networking options -> Network packet filtering framework (Netfilter) -> IP: Netfilter Configuration -> IPv4 connection tracking support（CONFIG_NF_CONNTRACK_IPV4）

内容的提问来源于stack exchange，提问作者Bender