适配gdata更新后elementR无法通过R CMD check的LC设置问题求助

我开发的R包elementR因依赖的gdata包函数发生变更，已完成适配以兼容新版本gdata，并构建了1.3.7版本。但在上传至CRAN前执行R CMD check --as-cran检查时无法通过，此前版本均能顺利通过该检查。我无法理解错误信息「6: Setting LC_MEASUREMENT failed, using "C"」的含义，恳请协助解析。

执行检查的代码及输出日志 #

install.packages("rcmdcheck")
library(rcmdcheck)
rcmdcheck("/home/cha/Documents/Boulot/elementR-version publié/Package/elementR_1.3.7.tar.gz")

── R CMD check ──────────────────────────────────────────────────────────
   During startup - Warning messages:
   1: Setting LC_CTYPE failed, using "C" 
   2: Setting LC_TIME failed, using "C" 
   3: Setting LC_MESSAGES failed, using "C" 
   4: Setting LC_MONETARY failed, using "C" 
   5: Setting LC_PAPER failed, using "C" 
   6: Setting LC_MEASUREMENT failed, using "C" 
─  using log directory '/tmp/Rtmpv5TXJD/file1a37e877283/elementR.Rcheck'
─  using R version 4.3.2 (2023-10-31)
─  using platform: x86_64-pc-linux-gnu (64-bit)
─  R was compiled by
       gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0
       GNU Fortran (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0
─  running under: Ubuntu 20.04.6 LTS
─  using session charset: ASCII
✔  checking for file 'elementR/DESCRIPTION' ...
─  checking extension type ... Package
─  this is package 'elementR' version '1.3.7'
✔  checking package namespace information
✔  checking package dependencies (4.2s)
✔  checking if this is a source package
✔  checking if there is a namespace
✔  checking for executable files ...
✔  checking for hidden files and directories ...
✔  checking for portable file names
✔  checking for sufficient/correct file permissions
✔  checking whether package 'elementR' can be installed (33.9s)
✔  checking installed package size ...
✔  checking package directory
W  checking DESCRIPTION meta-information ...
   During startup - Warning messages:
   1: Setting LC_CTYPE failed, using "C" 
   2: Setting LC_TIME failed, using "C" 
   3: Setting LC_MESSAGES failed, using "C" 
   4: Setting LC_MONETARY failed, using "C" 
   5: Setting LC_PAPER failed, using "C" 
   6: Setting LC_MEASUREMENT failed, using "C" 
    ERROR
   During startup - Warning messages:
   1: Setting LC_CTYPE failed, using "C" 
   2: Setting LC_TIME failed, using "C" 
   3: Setting LC_MESSAGES failed, using "C" 
   4: Setting LC_MONETARY failed, using "C" 
   5: Setting LC_PAPER failed, using "C" 
   6: Setting LC_MEASUREMENT failed, using "C" 
   
   See
     '/tmp/Rtmpv5TXJD/file1a37e877283/elementR.Rcheck/00check.log'
   for details.
   
   
── R CMD check results ────────────────────────────── elementR 1.3.7 ────
Duration: 40.7s

❯ checking DESCRIPTION meta-information ... WARNING
  During startup - Warning messages:
  1: Setting LC_CTYPE failed, using "C" 
  2: Setting LC_TIME failed, using "C" 
  3: Setting LC_MESSAGES failed, using "C" 
  4: Setting LC_MONETARY failed, using "C" 
  5: Setting LC_PAPER failed, using "C" 
  6: Setting LC_MEASUREMENT failed, using "C" 
   ERROR
  During startup - Warning messages:
  1: Setting LC_CTYPE failed, using "C" 
  2: Setting LC_TIME failed, using "C" 
  3: Setting LC_MESSAGES failed, using "C" 
  4: Setting LC_MONETARY failed, using "C" 
  5: Setting LC_PAPER failed, using "C" 
  6: Setting LC_MEASUREMENT failed, using "C" 

❯ checking DESCRIPTION meta-information ... WARNING
  During startup - Warning messages:
  1: Setting LC_CTYPE failed, using "C" 
  2: Setting LC_TIME failed, using "C" 
  3: Setting LC_MESSAGES failed, using "C" 
  4: Setting LC_MONETARY failed, using "C" 
  5: Setting LC_PAPER failed, using "C" 
  6: Setting LC_MEASUREMENT failed, using "C" 
   ERROR
  During startup - Warning messages:
  1: Setting LC_CTYPE failed, using "C" 
  2: Setting LC_TIME failed, using "C" 
  3: Setting LC_MESSAGES failed, using "C" 
  4: Setting LC_MONETARY failed, using "C" 
  5: Setting LC_PAPER failed, using "C" 
  6: Setting LC_MEASUREMENT failed, using "C" 

1 error ✖ | 1 warning ✖ | 0 notes ✔

日志文件内容 #

* using log directory '/tmp/Rtmpv5TXJD/file1a37e877283/elementR.Rcheck'
* using R version 4.3.2 (2023-10-31)
* using platform: x86_64-pc-linux-gnu (64-bit)
* R was compiled by
    gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0
    GNU Fortran (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0
* running under: Ubuntu 20.04.6 LTS
* using session charset: ASCII
* checking for file 'elementR/DESCRIPTION' ... OK
* checking extension type ... Package
* this is package 'elementR' version '1.3.7'
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for executable files ... OK
* checking for hidden files and directories ... OK
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package 'elementR' can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking DESCRIPTION meta-information ... WARNING
During startup - Warning messages:
1: Setting LC_CTYPE failed, using "C" 
2: Setting LC_TIME failed, using "C" 
3: Setting LC_MESSAGES failed, using "C" 
4: Setting LC_MONETARY failed, using "C" 
5: Setting LC_PAPER failed, using "C" 
6: Setting LC_MEASUREMENT failed, using "C" 
 ERROR
During startup - Warning messages:
1: Setting LC_CTYPE failed, using "C" 
2: Setting LC_TIME failed, using "C" 
3: Setting LC_MESSAGES failed, using "C" 
4: Setting LC_MONETARY failed, using "C" 
5: Setting LC_PAPER failed, using "C" 
6: Setting LC_MEASUREMENT failed, using "C" 
* DONE
Status: 1 ERROR, 1 WARNING

内容的提问来源于stack exchange，提问作者CharlotteS.