Arch Linux内核升级后外接硬盘无法识别的问题求助

大家好，我用的是Arch Linux，最近刚把内核升级到了最新版本——具体是Linux 6.2.12-arch1-1。

自从这次升级之后，我的两块外接硬盘都没法被系统识别了：一块是BTRFS格式，另一块是EXT4格式，现在都检测不到。不过我试了外接鼠标和键盘，它们都能正常工作，应该不是USB接口的硬件问题。

下面是我连接那块BTRFS格式硬盘后，dmesg输出的日志：

[34765.295989] ACPI Error: No handler for Region [VRTC] (00000000b13b9934) [SystemCMOS] (20221020/evregion-130)

[34765.296027] ACPI Error: Region SystemCMOS (ID=5) has no handler (20221020/exfldio-261)

[34765.296065] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20221020/psparse-529)

[34841.022047] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd

[34841.040628] usb 4-2: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=110..42

[34841.040657] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[34841.040669] usb 4-2: Product: My Book 25ED

[34841.040677] usb 4-2: Manufacturer: Western Digital

[34841.040685] usb 4-2: SerialNumber: [redacted]

[34916.397971] usb 4-2: USB disconnect, device number 10

[37705.154806] usb 4-2: new SuperSpeed USB device number 11 using xhci_hcd

[37705.173409] usb 4-2: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=110.42

[37705.173437] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[37705.173450] usb 4-2: Product: My Book 25ED

[37705.173458] usb 4-2: Manufacturer: Western Digital

[37705.173466] usb 4-2: SerialNumber: [redacted]

[37941.803264] perf: interrupt took too long (5174 > 5142), lowering kernel.perf_event_max_sample_rate to 38400

我之前怀疑是硬盘本身出问题了，但把这两块硬盘接到其他电脑上都能正常读写，所以肯定是升级内核后系统这边的问题。有没有大佬能帮忙分析一下怎么解决这个问题？

备注：内容来源于stack exchange，提问作者raaron773