如何在Neovim中禁用Copilot？执行:Copilot disable仍有提示

问题描述 #

执行:Copilot disable命令后，仍然收到Copilot的代码提示，推测和同时使用copilot.lua（自动补全）与copilot-chat.nvim有关。相关配置文件如下：

copilot.lua

return {
  "zbirenbaum/copilot.lua",
    cmd = "Cpt",    
    event = "InsertEnter",
  config = function()
    require('copilot').setup({
  panel = {
    enabled = true,
    auto_trigger = true,
    keymap = {
      jump_prev = "[[",
      jump_next = "]]",
      accept = "<CR>",
      refresh = "gr",
      open = "<M-CR>"
    },
    layout = {
      position = "bottom", -- | top | left | right
      ratio = 0.4
    },
  },
  suggestion = {
    enabled = true,
    auto_trigger = true,
    hide_during_completion = true,
    debounce = 75,
    keymap = {
      accept = "<M-Right>",
      accept_word = false,
      accept_line = false,
      next = "<M-]",
      prev = "<M-[>",
      dismiss = "<M-Left>",
    },
  },
  filetypes = {
    yaml = false,
    markdown = false,
    help = false,
    gitcommit = false,
    gitrebase = false,
    hgcommit = false,
    svn = false,
    cvs = false,
    ["."] = false,
  },
  copilot_node_command = 'node', -- Node.js version must be > 18.x
  server_opts_overrides = {},
    })
    end,
}

copilot-chat.lua

return {
  {
    "CopilotC-Nvim/CopilotChat.nvim",
    branch = "canary",
    dependencies = {
      { "nvim-lua/plenary.nvim" },         -- for curl, log wrapper
      { "nvim-telescope/telescope.nvim" }, -- Use telescope for help actions
    },
    opts = {
      debug = false, -- Enable debugging
      show_help = true, -- Show help actions
      window = {
        layout = "vertical",
        relative = "editor",
        width = 0.4,
        border = "single"   
      },
      auto_follow_cursor = false,    -- Don't follow the cursor after getting response
    },
    config = function(_, opts)
      local chat = require("CopilotChat")
      local select = require("CopilotChat.select")
      -- Use unnamed register for the selection
      opts.selection = select.unnamed

      -- Override the git prompts message
      --opts.prompts.Commit = {
      --  prompt = "Write commit message for the change with commitizen convention",
      --  selection = select.gitdiff,
      --}
      --opts.prompts.CommitStaged = {
      --  prompt = "Write commit message for the change with commitizen convention",
      --  selection = function(source)
      --    return select.gitdiff(source, true)
      --  end,
      --}

      chat.setup(opts)

      vim.api.nvim_create_user_command("CopilotChatVisual", function(args)
        chat.ask(args.args, { selection = select.visual })
      end, { nargs = "*", range = true })

      -- Inline chat with Copilot
      vim.api.nvim_create_user_command("CopilotChatInline", function(args)
        chat.ask(args.args, {
          selection = select.visual,
            window = {
                layout = "vertical",
                relative = "editor",
                width = 0.4,
                border = "single"   
            },
        })
      end, { nargs = "*", range = true })

      -- Restore CopilotChatBuffer
      vim.api.nvim_create_user_command("CopilotChatBuffer", function(args)
        chat.ask(args.args, { selection = select.buffer })
      end, { nargs = "*", range = true })
    end,
    event = "VeryLazy",
    keys = {
      -- Show prompts actions with telescope
      {
        "<leader>ccp",
        function()
          local actions = require("CopilotChat.actions")
          require("CopilotChat.integrations.telescope").pick(actions.prompt_actions())
        end,
        desc = "CopilotChat - Prompt actions",
      },
      -- Code related commands
      { "<leader>cce", "<cmd>CopilotChatExplain<cr>",       desc = "CopilotChat - Explain code" },
      { "<leader>cct", "<cmd>CopilotChatTests<cr>",         desc = "CopilotChat - Generate tests" },
      { "<leader>ccr", "<cmd>CopilotChatReview<cr>",        desc = "CopilotChat - Review code" },
      { "<leader>ccR", "<cmd>CopilotChatRefactor<cr>",      desc = "CopilotChat - Refactor code" },
      { "<leader>ccn", "<cmd>CopilotChatBetterNamings<cr>", desc = "CopilotChat - Better Naming" },
      -- Chat with Copilot in visual mode
      {
        "<leader>ccv",
        ":CopilotChatVisual<ENTER>",
        mode = "x",
        desc = "CopilotChat - Open in vertical split",
      },
      {
        "<leader>ccx",
        ":CopilotChatInline<cr>",
        mode = "x",
        desc = "CopilotChat - Inline chat",
      },
      -- Custom input for CopilotChat
      {
        "<leader>cci",
        function()
          local input = vim.fn.input("Ask Copilot: ")
          if input ~= "" then
            vim.cmd("CopilotChat " .. input)
          end
        end,
        desc = "CopilotChat - Ask input",
      },
      -- Generate commit message based on the git diff
      {
        "<leader>ccm",
        "<cmd>CopilotChatCommit<cr>",
        desc = "CopilotChat - Generate commit message for all changes",
      },
      {
        "<leader>ccM",
        "<cmd>CopilotChatCommitStaged<cr>",
        desc = "CopilotChat - Generate commit message for staged changes",
      },
      -- Quick chat with Copilot
      {
        "<leader>ccq",
        function()
          local input = vim.fn.input("Quick Chat: ")
          if input ~= "" then
            vim.cmd("CopilotChatBuffer " .. input)
          end
        end,
        desc = "CopilotChat - Quick chat",
      },
      -- Debug
      { "<leader>ccd", "<cmd>CopilotChatDebugInfo<cr>",     desc = "CopilotChat - Debug Info" },
      -- Fix the issue with diagnostic
      { "<leader>ccf", "<cmd>CopilotChatFixDiagnostic<cr>", desc = "CopilotChat - Fix Diagnostic" },
      -- Clear buffer and chat history
      { "<leader>ccl", "<cmd>CopilotChatReset<cr>",         desc = "CopilotChat - Clear buffer and chat history" },
      -- Toggle Copilot Chat Vsplit
      { "<leader>ccv", "<cmd>CopilotChatToggle<cr>",        desc = "CopilotChat - Toggle Vsplit" },
    },
  },
}

init.lua

local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
if not vim.loop.fs_stat(lazypath) then
  vim.fn.system({
    "git",
    "clone",
    "--filter=blob:none",
    "https://github.com/folke/lazy.nvim.git",
    "--branch=stable", -- latest stable release
    lazypath,
  })
end
vim.opt.rtp:prepend(lazypath)

require("vim-options")
require("keymaps")
require("lazy").setup({
  spec = {
    { import = "plugins" }, -- loads all plugins in plugins/
  },
  defaults = {
    lazy = false, -- plugins are not lazy loaded by default
  },
})

解决方案 #

:Copilot disable是官方Copilot插件的命令，对第三方实现的copilot.lua无效。代码提示由copilot.lua的suggestion模块控制，copilot-chat.nvim仅依赖Copilot服务，不负责代码提示。

1. 临时开关代码提示（会话内生效） #

直接调用copilot.lua的API控制：

-- 关闭代码提示
require('copilot.suggestion').disable()
-- 重新开启代码提示
require('copilot.suggestion').enable()

嫌每次敲Lua麻烦的话，在配置里加自定义命令：

vim.api.nvim_create_user_command('CopilotSuggestionToggle', function()
  local suggestion = require('copilot.suggestion')
  if suggestion.is_enabled() then
    suggestion.disable()
    print('Copilot 代码提示已关闭')
  else
    suggestion.enable()
    print('Copilot 代码提示已开启')
  end
end, {})

之后执行:CopilotSuggestionToggle就能一键开关。

2. 永久全局关闭或按需禁用 #

修改copilot.lua配置，把suggestion.enabled设为false即可全局禁用代码提示：

suggestion = {
  enabled = false, -- 改为false全局关闭
  auto_trigger = true,
  hide_during_completion = true,
  debounce = 75,
  keymap = {
    accept = "<M-Right>",
    accept_word = false,
    accept_line = false,
    next = "<M-]",
    prev = "<M-[>",
    dismiss = "<M-Left>",
  },
},

如果只想在特定文件类型里禁用，调整filetypes配置，添加对应类型：

filetypes = {
  yaml = false,
  markdown = false,
  help = false,
  gitcommit = false,
  gitrebase = false,
  hgcommit = false,
  svn = false,
  cvs = false,
  ["."] = false,
  -- 新增要禁用的文件类型
  python = false,
  javascript = false,
},

3. 完全停止Copilot服务（含Chat功能） #

如果需要彻底关掉Copilot所有功能，包括Chat，用以下API：

-- 停止Copilot服务
require('copilot').stop()
-- 启动Copilot服务
require('copilot').start()

同样可以封装成命令：

vim.api.nvim_create_user_command('CopilotServiceToggle', function()
  local copilot = require('copilot')
  if copilot.is_running() then
    copilot.stop()
    print('Copilot 服务已停止')
  else
    copilot.start()
    print('Copilot 服务已启动')
  end
end, {})

内容的提问来源于stack exchange，提问作者Levi